CS400
Continuously updated help section with FAQs and Technical Articles. Please send ideas for future articles. We are able to create them in a very short time. Forthcoming articles include: Coating/Brick Thickness, How To Setup Remote Clients and software interface short videos
Scope of delivery for A-CS-BZ-EN-KIT-485 The scope of delivery for the Burning Zone Monitoring accessory: 1. Endurance ratio pyrometer, type: E1RL-F2-V...
Fri, 19 Sep, 2025 at 7:26 AM
New Keys will be generated on at least a weekly basis Created Sunday 31st August 2025 Advanced TR8EAX-JP3AME-3Y9WDX-GP936E-0F8W1M-MTFSA0 Sta...
Mon, 1 Sep, 2025 at 4:53 PM
Updated on 11 August 2025 Q. What is happend when OPC UA Server is not running? A. Check that Port 4840 is unused or change port in CS400.ini file. Upd...
Mon, 11 Aug, 2025 at 3:03 PM
Item Part Number Line scanner RAYTMP150HRR1 TSM/LRM Controller XXXTCSLRMMCONNBOX Stainless Steel Housing Window S-ENC-PW Line scanner wi...
Fri, 30 May, 2025 at 3:46 PM
The demo data and installer package are deliberately separate to avoid confusion for real customer installations. Administrator rights are necessary. Th...
Mon, 12 May, 2025 at 2:50 PM
Table for comparison of main differences between the two available packages. Feature CS400 Standard CS400 Advanced Number of kilns 1 Unlim...
Thu, 2 Jan, 2025 at 4:47 AM
See steps below to clear out (zero baseline) the running CS400 database. - stop all CS400 monitoring functionality ***Note, the below procedures nee...
Fri, 24 May, 2024 at 12:54 PM
Via Tab Configuration - Alarms Specific mapping for OPC alarm tags are not necessary. Click Apply then Close After setting and one revolutions, Y...
Fri, 15 Mar, 2024 at 10:46 AM
Updated Guidance on the use of Virtual Machines and/or Windows Server Environments One of the common inquiries we receive is whether CS400 can operate o...
Mon, 12 Feb, 2024 at 5:58 PM
The minimum allowed kiln speed is defined as Max. rotation time (sec) in Configuration Set the time based on your lowest desired kiln speed where b...
Tue, 23 Jan, 2024 at 5:47 PM