CS210 Field devices not communicating with serial device server (Windows 10)
We noticed an issue with Virtual ports created by the Serial Device Configuration Utility don't have valid digital signatures in windows 10. This stops...
Tue, 4 May, 2021 at 1:18 PM
CS210 SQL Issue Resolutions
1.  SQL server issue will occur during CS software installation attempt if the local admin account password has changed. If it is not possible to revert...
Fri, 30 Apr, 2021 at 8:12 PM
CS210 View-only Client Setup Instructions and FAQs
Prerequisites Server and Client PCs should be on the same network and have the same IP address range but with unique fourth octet values Server PC shou...
Wed, 7 Apr, 2021 at 9:34 PM
PCOMM error message "A device attached to the system is not functioning"
Using PCOMM to check operation of devices connected to serial server: In this case you can also see the serial server in the Advantech Utility and ...
Wed, 13 May, 2020 at 4:51 PM
CS100 was cancelled in 2006 when CS200 was released. CS100 used a mini microcontroller to handle the 100 lines needed per revolution. For data archiving...
Fri, 22 Jan, 2021 at 6:15 PM
HR Linescanner Emissivity for use with Fluke 4181
For a calibration check in the field of an HR MP150 as used with the CS210 together a Fluke 4181 IR Calibrator.  Please use the following settings: Dis...
Mon, 30 Nov, 2020 at 5:40 PM
CS210 6.4 How to Enable dotnet3.5
Thu, 3 Sep, 2020 at 4:47 PM
Q. What pre-requisites are needed on the pc before installing CS. A. Microsoft .net3.5 must be installed, local password protected admin account, disable U...
Thu, 3 Sep, 2020 at 4:40 PM
CS210 - Spare Parts List
  Item  Part Number  Line scanner RAYTMP150HRR1 LRM Controller XXXTCSLRMMCONNBOX Stainless Steel Housing Window XXXSYSPHSW Line scanner window XXX...
Thu, 20 Aug, 2020 at 10:20 AM
CS210 v 6.4 workaround for reversing tire order
To reverse the order of the tire numbering as seen in the CS program. It is not possible to use the checkbox Number ring positions from the right side T...
Thu, 18 Jun, 2020 at 12:30 PM