Counting Functionalities

Counting Settings Essentials
Introduction This section discusses the Counting tab available on the Irisys Vector devices.  Anyone new to Vector devices should start here. The Coun...
Thu, 17 Oct, 2024 at 12:12 AM
Counting Settings Quick Start
Introduction This quick guide discusses the Counting functionality available on the Irisys Vector devices and how to configure it. A full understanding of...
Thu, 17 Oct, 2024 at 12:13 AM
Available Register Types
Introduction This quick guide briefly descries the different register types that are available on Vector devices and what they can be used for. For detail...
Thu, 17 Oct, 2024 at 12:13 AM
Basic Counting Line Registers
Introduction This guide discusses the basic counting line register type. This register counts the number of people who cross the line. Each counting line ...
Thu, 17 Oct, 2024 at 12:14 AM
Line & Zone Placement
Line & Zone Placement Most of the register types will have a corresponding virtual count line or zone that must be configured within the available fie...
Thu, 17 Oct, 2024 at 12:15 AM
Line & Zone Alignment
Introduction Aligning lines and zones with each other makes for a neat setup but importantly it is recommended for high accuracy counting and is even requ...
Thu, 17 Oct, 2024 at 12:16 AM
Register Count Modes
Introduction This quick guide discusses the individual register Count Mode settings available on the Irisys Vector 4D devices, and how to configure it. ...
Wed, 6 Nov, 2024 at 2:30 PM
Group Counting (Smart Boundary)
Introduction This quick guide discusses the Group Counting functionality available on the Irisys Vector units and how to configure it. A full understandi...
Wed, 6 Nov, 2024 at 2:46 PM
Global Height Filter
Introduction This quick guide discusses the Global Height Filter functionality available on the Irisys Vector 4D devices, and how to configure it. The ...
Wed, 6 Nov, 2024 at 2:47 PM
Register Height Filtering
Introduction This quick guide discusses the individual register Height Filter settings available on Irisys Vector 4D devices, and how to configure them....
Wed, 6 Nov, 2024 at 2:48 PM