MP150/300
For anything around the Raytek/ Fluek Process Instruments line scanner
Firmware Update for affected Scanners For Alert list announcement: click on MP - Alert List (known issues) Applicable for Scanners having firmware 4.0...
Fri, 21 Jun, 2024 at 3:44 PM
Generally, a linescanner is mounted perpendicularly to the process. In this situation it is commonly understood that with the 90° FOV, the scan width is 2x ...
Fri, 29 Aug, 2025 at 3:59 PM
For many years, MP150 systems were supplied in 2 ways: 1. Order RAYTMP150 only - linescanner is supplied with cables but no additional accessories, plus...
Fri, 22 Aug, 2025 at 2:28 PM
Information from FPI Berlin Service Manager General Overhaul Check motor for excessive audible bearing noise Check running time - if close to 45,000 h...
Thu, 19 Jun, 2025 at 1:34 PM
Example for setting the scanner internal sector 1 over the entire 90° FOV Configuring of alarm relay with 1s hold time SL1000 set 0 degre...
Thu, 25 Jul, 2024 at 5:16 PM
Updated 20th March 2024 Q. I have an MP300 and there is tape on the upper part of the window - is this normal? A. Yes, this is an adaptation for the re...
Wed, 20 Mar, 2024 at 2:23 PM
The MP300 has a modified front window design: Due to the dual mirror design has a reduced height in comparison with the single mirror of the MP150....
Wed, 20 Mar, 2024 at 2:21 PM
Every spare linescanner window is supplied with the correct transmission factor for the spectral response of the linescanner it is supplied for. Note - ...
Mon, 11 Dec, 2023 at 6:24 PM
As the Raytek TMP150, FPI MP and ScanIR3 Linescanner share the same basic design, spare Mica windows as listed below are interchangeable Special Note ...
Thu, 28 Sep, 2023 at 4:39 PM
STEP files for TMP150/300 scanner as used in ES, GS, EC, TF and CS systems. Attachments: MP150.zip MP150.jpg MP150.stp XXXSYSPHSS.jpg XXXSYSPHS...
Thu, 31 Aug, 2023 at 5:19 PM