MP150/300
For anything around the Raytek/ Fluek Process Instruments line scanner
As-Found Condition: Unable to communicate with MPxxx linescanner via ethernet connectivity due to unknown IP address associated with the linescanner. S...
Fri, 7 Oct, 2022 at 8:07 PM
Added cable color information to pin assignment. Only checked for red HT cable
Thu, 24 Mar, 2022 at 12:35 PM
In case of trouble with analog outputs on back side of scanner (4 pin connector) you can do: Use command "GSCn" for check about right calcula...
Fri, 11 Mar, 2022 at 3:20 PM
For a calibration check in the field of an HR MP150 as used with the CS210 together a Fluke 4181 IR Calibrator. Please use the following settings: Dis...
Mon, 30 Nov, 2020 at 5:40 PM
Formerly a Techmail. This guide shows how to connect the MP150 or MP50 RS485 cable to the XXXUSB485S adapter:
Thu, 14 May, 2020 at 10:49 AM