Thermalert 4.0
Useful information and downloads for T4.0 sensor
Updated 6th March 2025 Q. After updating the firmware and power cycling the sensor is stuck on EUUU or EHHH? A. Please run a factory reset via the soft...
Thu, 6 Mar, 2025 at 3:43 PM
Initialization Parameters: Special Note: If you calibrate the sensor and adjust offset and gain using DTMD, you must transfer the values into y...
Wed, 24 Jul, 2024 at 7:38 PM
Please see the attached video file regarding laser control of the Fluke Thermalert 4.0 sensor utilizing Ethernet/IP protocol, Allen-Bradley PLC and Studio50...
Thu, 21 Mar, 2024 at 10:02 PM
Please see the attached video file regarding Ethernet/IP connectivity of Fluke T40 sensor with Schneider Electric PLC using the Schneider 'Machine Exper...
Tue, 12 Mar, 2024 at 6:30 PM
In the single downloadable ZIP file there is USB Driver. Here are the FTDi driver setup files. You should unzip the contents to a folder and navigate to th...
Mon, 15 Feb, 2021 at 3:08 PM
GSDML-V2.34-FPI-T40-20190916.xml is the latest proven version of the GSDML file GSDML-0053-4005-T40.bmp is used to represent the device in the programming ...
Wed, 10 Mar, 2021 at 1:08 PM
Please download excel file.
Wed, 9 Mar, 2022 at 11:21 AM
Thermalert 4.0 Advanced Post Processing is defined by 3 parameters. It is mutually exclusive to Peak or Valley hold: C = Threshold temperature for reset...
Mon, 28 Jun, 2021 at 3:57 PM
Thermalert 4.0 Advanced Post Processing is defined by 3 parameters. It is mutually exclusive to Peak or Valley hold: C = Threshold temperature for reset...
Mon, 28 Jun, 2021 at 3:56 PM
Changes with revision 2.4 [July 2021] Adding HART communication protocol as option for 2 wire units, see section 11 Adding intrinsically safe rating as o...
Wed, 14 Jul, 2021 at 5:52 PM