Fluke Process Instruments

  Base Model Description and Specs Remarks T40-CO2-30-SF0-X Photodetector type             : Detector TS80 Thermopile Spectral Response : 4.24 µ...

Attachments : Video (How to configure it on DTMD), wiring photo and Modem photo) In addition to the ProComSol, model HM-USB-ISO (see attached date shee...

EC – Directive 2014/30/EU – EMC EC – Directive 2011/65/EU – RoHS Compliance amended by Directive (EU) 2015/863 EC – Directive 2014/34/EU – ATEX valid fo...

 A small number of units ("4 wire M12" versions ending with -3, -4 or -5) were found to have been built with duplicate MAC addresses. If the M...

All sensors are able to manually set an anlog signal value independent of the signal level representing the process temperature The purpose of this is t...

Our standard replacement sensor for Ircon Modline 4: Is the FPI Thermalert T4.0 "-0 option" (2-wire version, please note the gland fit...

Here is the attached HART Communication Protocol manual for Thermalert T4.0 (T40)

For 2-wire, 6-wire, and 12-wire sensors, customers can use latest firmware update via DTMD. Firmware: Main_02.05.0301_Analog_02.05.0222 (Attached) N...

For IEC 60529:2013 standard, please find the certificate enclosed.

Extract From Manual 5.8.5 Trigger Input The trigger input can be used either as Reset or Hold, or as Laser switch. The trigger function is activated by...