Endurance
The Endurance sensor offers a number of methods to control the laser or LED sighting options used for aligning the measurement spot with the process: Se...
Mon, 16 Oct, 2023 at 6:48 PM
Generally, the mA input (when enabled) is used for remote adjustment of the Emissivity parameter. However, some applications demand that the emissivity...
Mon, 16 Oct, 2023 at 6:40 PM
This feature needs firmware v2.02.18 and higher. This setting ensures that the mA signal, when set to 4-20mA will not drop below 4mA. Using the ASCI...
Thu, 5 Oct, 2023 at 5:15 PM
The E1RL model is unique in the range in that it has two measurement ranges: In 1C mode the lowest measurable temperature is 550° Celsius. In 2C mode ...
Thu, 5 Oct, 2023 at 5:13 PM
The Endurance provides 2 external power inputs via the M12 PoE connector and the M16 12-pin connector. From time to time we are asked if 2 power supplie...
Mon, 21 Aug, 2023 at 3:59 PM
For Calibration of Endurance the following sequence is recommended: 1. Calibration of the analog output See Article 2. Setting up the sensor with a ...
Tue, 8 Aug, 2023 at 12:22 PM
Please use this table when calibration or checking the most common Endurance sensors Please note, the column Distance must be used with the following co...
Tue, 8 Aug, 2023 at 12:09 PM
June 29th 2.03.11_2.02.35 replaces 2.03.10_2.02.34 Changelog: 29.06.2023 (draft) STM: Version 2.02.35 /GD: Version 2.03.11: *mA output +0.35mA...
Thu, 29 Jun, 2023 at 6:10 PM
EnduranceEIP_04252019.eds and associated .ico and .bmp file Factory EDS File developed with: Name: 1769-L24ER-QB1B/A LOGIX5324ER Prod...
Fri, 28 Apr, 2023 at 5:52 PM