Endurance

Endurance Calibration Guide
Draft document outlining the field calibration tool in the Endurance software. Endurance Field Cal Procedure Document
Tue, 23 Feb, 2021 at 1:39 PM
Manipulation of Attenuation Value by Adjustment of Emissivity
See video
Thu, 17 Jan, 2019 at 2:10 PM
Remote emissivity/slope mA lookup table
Downloadable excel file with sheets for each option (0/4-20mA and emissivity/slope) giving full list of values:
Thu, 9 Jul, 2020 at 6:58 PM
Comparison of Video Sighting Streams
Endurance offers an MJPEG stream. There can only be 2 connections. Only the view in DTMD or the web server provides a center reticle and temperature informa...
Mon, 18 May, 2020 at 10:52 AM
How to use DTMD v6 to upload a settings file to correct sensor range and output range parameters
A small batch of sensors with the model numbers below may have an incorrect temperature range. Generally, this is not a problem if the mA output scaling is ...
Thu, 14 Nov, 2019 at 5:57 PM
Simple Console Application in C#
Here is a simple console application in C# that sends ?XV (serial number) over TCP and displays the response. IP address and network port must be adjusted ...
Tue, 3 Mar, 2020 at 4:26 PM
Simple Console Application in C#
Here is a simple console application in C# that sends ?XV (serial number) over TCP and displays the response. IP address and network port must be adjusted ...
Mon, 2 Mar, 2020 at 3:30 PM
Dimensions of field replaceable sensor window E-PW (also XXX2CPW)
Window dimensions: 20mm x 3mm Material: BK-7
Wed, 10 Jul, 2019 at 11:56 PM
Additional developer information to help integration of Endurance Video
A useful dll for c++ or c# environments to integrate the video stream (picture only). mjpegprocessor.dll (as used in Endurance and new Multidrop softwar...
Fri, 27 Apr, 2018 at 2:21 PM
Maximum Alllowed Attenuation (Signal Reduction) for E2R
Temperature deg CAllowed Attenuation<305030512.431023.131532.332040.332547.233053.333558.534063.134567.235070.735573.836076.536578.937081.13758338084.73...
Thu, 19 Jul, 2018 at 10:46 AM