Endurance
Endurance differs from all other devices we have, in that the focus distance does not start from the front face of the device. The front of the enduranc...
Tue, 23 Nov, 2021 at 4:18 PM
Updated 12th May 2025 Answers to questions, perhaps not covered by existing documentation: Q. What is the ASCII command for "MATCH" function ...
Mon, 12 May, 2025 at 12:45 PM
Updated April 24th 2025 19.08.2024 STM: Version 2.02.38 /GD: Version 2.03.13: * 0-20mA output stays 0 after RST (STM only), too short timeout after RST...
Wed, 23 Apr, 2025 at 5:22 PM
JPG, STEP and PDF (where available) for most commonly requested Endurance sensor files
Mon, 13 Jan, 2025 at 5:06 PM
A-T40-MF Mounting flange for T40 or Endurance
Fri, 22 Nov, 2024 at 5:05 PM
GSDML-V2.25-FlukeProcessInstruments-Endurance-20240827.xml is the latest proven version of the GSDML file The GSDML-0053-4004-Endurance.bmp is used to repr...
Fri, 30 Aug, 2024 at 9:58 AM
If the customer needs a spare connector for a custom length, the connector can be ordered from after-market. Here is the link for the connector availabl...
Wed, 14 Aug, 2024 at 1:05 PM
In the scenario where you have a calculated temperature for the 1C reading but encounter an EUUU message (as opposed to EAAA) situation for the 2C reading, ...
Mon, 22 Jul, 2024 at 6:47 PM
Custom Calibration The customer calibration function is designed to allow better results for temperature correction than using the standard offset and g...
Thu, 13 Jun, 2024 at 12:37 PM
Special thanks to Greg Secord for creating the excel file that generates a suitable string of ICAL commands for use with a a terminal program such as Putty ...
Thu, 13 Jun, 2024 at 12:35 PM