Fluke Process Instruments

Introduction When installing Irisys Vector devices, there are a things that the installer must be aware of in order to ensure that they are installed corre...

Introduction The Vector Time of Flight devices have a field of view in which they can detect and track people as they walk underneath. This is different t...

Introduction In the vast majority of cases, the Vector will be installed on the ceiling, looking directly down at the area next to the door. In this way, p...

Introduction Sometimes getting a device in the optimum position is not easy - the layout of the building can make it challenging to ensure that there is ad...

Vector Orientation Vectors are indoor only devices, so when counting people into shops, offices and other buildings directly from the outside, ensure the V...

Installation  Once you have decided on the best location to install, remember that Vectors weigh approx. 550g so always use appropriate fixings to secure t...

Introduction This quick guide is intended to assist installers with cable connections to the Vector 4D Time of Flight people counter. Before running cab...

Introduction This quick guide discusses the Multi-Unit Network functionality (also referred to as wide opening network) available on the Irisys Vector un...

Introduction This wiki section discusses installation of the optional wireless Fine Motion Room sensor. This optional hardware component provides a corres...

Introduction  This document describes the features and configuration options of the IWC6203 Vector USB-IO module. This is an Input/Output hardware module ...