I/O Module System (WAGO)
WAGO is used for Thermoview, ScanIR3, Raytek DTDP and SV600 products. Advice here can apply generally to all.
Supplied under the part numbers A-IO-BASICKIT or XXXETHBASICKIT the Wago I/O controller 750-362 supplied by Fluke provides three options for IP address set...
Fri, 23 Feb, 2024 at 6:06 PM
For the wiring of the Wago Kit, we need an SMPS (24VDC Power Supply). The SMPS needs to be connected to Supply Module 750-602 (+24V to Terminal "6&quo...
Mon, 19 Sep, 2022 at 6:46 AM
Special Note: The information about content is included in the TV40 manual only, the FPI I/O manual will be updated for the next revision. This is the ...
Thu, 18 Aug, 2022 at 4:47 PM
Fieldbus Coupler 750-362 750-362 (750-352 is DISCONTINUED) 2-channel relay output; AC 250 V; 2.0 A; Potential-free; 2 make contact 750-513 2-channel...
Thu, 18 Aug, 2022 at 4:07 PM
The attached instructional video shows how to configure the IP address of a Wago module via the Sectormaster software. The most critical steps of the pr...
Fri, 30 Apr, 2021 at 7:51 PM
Q. Why I can not connect the WAGO controller with my PC? A. It could be that the controller is set to DHCP. Please refer WAGO web page...
Wed, 2 Mar, 2022 at 1:41 PM