Scan IR3

S3X-REPKIT Details and Notes
Here are the contents of the water cooling adaptation pipes for installing ScanIR3 into a Scan IR2 housing. Consider it as being only what is required for t...
Wed, 30 Mar, 2022 at 6:21 PM
ScanIR3 Connection to ScanIR2 Shutter Control Cabinet
For ScanIR2 to ScanIR3 upgrades where there are shutter or gate control cabinets, the ScanIR3 internal relay is connected to the control signal in place of ...
Wed, 30 Mar, 2022 at 2:33 PM
ScanIR3 RS485 and AO Cabinet Connections
Necessary to make a serial connection to the scanner, usually to change the IP address if the address has been forgotten. Data is on X3 (7-9)
Wed, 23 Feb, 2022 at 6:12 PM
ScanIR3 - Cable Connector Pinout and Terminal Details
1. Terminal Side Details : 2. Pinout Connector Side Details :  Pin-Out Wire Color Description A1 Black with Number-1 Ground A2 Black wit...
Mon, 6 Dec, 2021 at 2:13 PM
Q. The analog output signal does not match the calculated sector or zone values, or the control system reading does not match the calculated sector or  zone...
Wed, 3 Mar, 2021 at 1:13 PM
How to Configure Linescanner Internal Temperature Alarm Relay
Special commands are necessary to add to tthe SectorMaster or ZoneMaster Configurator. Please download the attached document or use this link: How to Co...
Wed, 3 Mar, 2021 at 1:01 PM
How Do We Do It_MP150_ScanIR3_Changing IP Address of a Fieldbus Coupler
The document explains the procedure of changing the IP address of a fieldbus coupler.
Wed, 8 Feb, 2017 at 8:28 PM