Attached are downloadable installation guideline documents created by the Technical Support team:
Installation Guidelines
Quick Start 2 - sides A4 (foldable)
Delete/Assign/Number heads via ASCII and Terminal Program
Special Notes on Mi3 Installation in general
1. Each sensing head "system" must have a single point of connection to Protective Earth
2. In case of multiple heads installed on the same ground plane - electrically isolated heads or fit air purge collars.
3. If the above is not possible then consider disconnecting head cable shields and connecting the COMM or MCOMM box to the same ground plane.
June 2023 - slightly refreshed Mi3 Quick Start - new QR code to our Solutions pages.