The aim of this short guide is to describe the necessary minimum steps to set-up an SV600 together with a Wago I/O setup (controller) to provide an alarm output.
1. Determine network setup and configure accordingly:
a: All devices connected via network switch = used fixed IP address for all devices or use DHCP for all devices (if DHCP server is on the network)
b: SV600 and Wago set on different networks = used fixed IP address for all devices or automatic IP assignment (169.254.nnn.nnn) for SV600 and fixed IP address for Wago controller.
One example for this in a trial is the primary LAN port used for the SV600 (via a PoE injector) and a USB/LAN converter used for the Wago controller.
2. In case any doubt with the wiring connection, please refer to the below link :
Easy Wiring : WAGO I/O Modules
3. For testing the Wago DO alarm, please refer to the attached How to do video :
File Name : Setting up a SoundMap Event Trigger on a Wago Unit.mp4