USB IO Module Issue
Type: This is a 'Warning' message (Yellow highlight), but may be accompanied by other related and unrelated Warning or Error messages.
Source: This originates from the Vector itself.
Symptoms: Apart from the warning message itself there may be no other symptoms, dependent on whether there should be a USB IO module connected.
Cause: At time of installation, a USB IO module was connected and configured but comms to that module has since failed.
Fix: To fix this issue, depends on whether there should be a USB IO Module connected or not.
If there should still be a module connected then this indicates an issue of some kind which should be investigated and fixed. This will need an on site visit to ensure that the cable has not become disconnected or damaged, or the module itself has not been damaged in some way.
If the module is genuinely, and correctly, no longer connected, this message tells us that it was simply disconnected without modifying the configuration to reflect that it is no longer required. Therefore the device should be reconfigured to remove the USB IO module settings.