Fluke Process Instruments

Type: This is a 'Warning' message (Yellow highlight), but may be accompanied by other related Warning or Error messages.

Source: This originates from the Vector itself. 

Symptoms: A valid height is not configured and so a field of view will not be shown on the main 'Counting' settings tab.

Cause: A device has not been fully configured yet. The warning is to be expected when installing and configuring in separate stages, e.g. device is configured with bare minimum remote access settings, device is then installed, configuration of device is then completed via remote connection. Between being installed and finishing the configuration this warning is normal.

Fix: To fix this issue, simply complete configuration and ensure settings are saved.