Vector Firmware
Latest version of Vector Firmware is always available here, see links below.
FW for all Vector PoE devices
(including Vector Analytic, Vector Count, and SafeCount Vectors):
FW for all non-PoE Vector devices
(Including any original non-PoE Vector Analytics and non-PoE SafeCount devices):
Firmware Update Instructions
Firmware updates can be performed via an Estate Manager connection to a device, or via a direct connection to a device using the RIFT exe setup software.
1. Connect to the Vector via RIFT standalone exe or select the device from within Estate Manager.
2. Click the 'Actions' button in the top right corner and select the 'Task Launcher' option from the drop down list
3. Click 'Upload Task Package' then, on the next dialog, click 'Choose Files'
4.Navigate to the firmware update task file(s) on your PC and select the ones you want, then Click 'Uploadall'
Once a firmware file is available it will be selectable from the dropdown menu for future use
5. Choose the relevant fw file from the drop down, and click ‘Run Task'
6. Updating the firmware will take a few minutes. Once complete the Vector is fully updated. It is recommended to finally reboot the Vector if possible. Note some firmware updates may require a full factory reset – always read the accompanying instructions.
Firmware Versions and Changes List
In all cases Irisys recommend utilising the very latest version of firmware currently available. But for those interested the list of change notes for each released firmware is available here.