Introduction
Vectors do not generally need to be rebooted, but there are occasions when a reboot is required, for example when inserting a USB-IO module or USB Bluetooth Receiver, so that the drivers are correctly installed and the add-on is fully useable.
Additionally when contacting Irisys support for technical queries relating to a device, you maybe asked to reboot a device as part of the fault finding process.
Lastly when performing a firmware update, most updates will finish with an automatic reboot, but some will require a manual reboot.
Reboot Device Option
When connected to a device for setup purposes via the RIFT application, the Reboot Device option is available in the Actions menu in the top right:
Note that different RIFT connections may have slightly different options to the ones shown above. This is normal and to be expected.
Note also that when using the Estate Manager RIFT connection you must choose the Live View option in order to perform a remote reboot:
