The simplest way is to type the IP address into your web browser.
If the IP address is not known and the camera is set to AutoIP or DHCP, then the camera will be listed under Other Devices via Network in WIndows Explorer
Right-click Properties
or Right-click View device webpage.
On first use you may have this message.
Click on Advanced
Click on Proceed to 192.168.1.117 (unsafe)
User: admin
Password: admin
Special Note:
On first use you will be prompted to create a new user and password. If the password is too short you will the following warning.
If using Google Chrome - you may see a message that the password was detected as part of a security breach by your password manager - in which case please try an alternative browser.
640x4680 full frame at 350mm distance