WAGO 750-352 OR 750-362 fieldbus coupler
The following WAGO 750 extension modules are tested and supported:
750-1504, 750-1406, 750-513, 750-563
Proper work of other modules is not guaranteed.
If any not supported module is used (even with other supported modules), The ThermoView may not be able to address inputs and outputs correctly. It is also observed that the Thermoview program will not allow you to connect to the Wago device. A corresponding error message will be displayed.
Based on some Channel Partners trials it has been found that the below modules in the given sequence worked.
It is for reference only. Not tested by FPI. It could be working based on some common functions of the manufacturer (Wago).
1. 750-362, Fieldbus Coupler Modbus TCP; 4th generation
2. 750-613, System Power Supply; 24 VDC
3. 750-400, 2-channel digital input; 24 VDC; 3 ms
4. 750-504, 4-channel digital output; 24 VDC; 0.5 A
5. 750-600, End Module