SV600 Multiple Acoustic Imager Controlling Single WAGO Coupler : Fluke Process Instruments

SV600 Multiple Acoustic Imager Controlling Single WAGO Coupler Print

Modified on: Wed, 2 Mar, 2022 at 10:51 AM

Multiple Acoustic Imager can control a single WAGO Fieldbus Coupler with modules.

The WAGO Fieldbus Coupler does not consider from where the control message is coming from.

Each Acoustic imager communicates using the Modbus TCP protocol. Please be aware that this does not mean that it can communicate with a PLC.

Theoretically, there is no limit to the number of Acoustic imagers that can control a WAGO Fieldbus Coupler, although at this time only 2 imagers have been tested.

Did you find it helpful? Yes No

SV600 Multiple Acoustic Imager Controlling Single WAGO Coupler Print

Related Articles