To receive a link to download the latest firmware Click Here to create a support ticket
SV600 Release notes 28th October 2024
Version 2.10.3 - Official Release
Features:
(MeQ only with new License file accessible)
- NFS support for storing results on a remote share
- Anomaly detector UX/UI improvements
- Backend can connect to a NTi XL3 device to get certified class-1 results
- More input fields in the front end are checked on validity of given input
- NFS support for storing results on a remote share
- MecQ support as measurement type, action type and to use with SPOT
- New event trigger logic: added logic to configure when event triggers are send.
- Three new trigger types:
- Rising edge detection
- Falling edge detection
- Dual edge detection
- Additionally a timeout can be applied to any event.
- New MultiSource data filter: added logic to configure the number of sources the user wishes to visualize on the soundsurface.
- Is applicable for data of soundsurfaces (others will follow in future)
- The user can indicate how many sources they want to visualize on the soundsurface
- The SNR threshold can also be set
- Input validation on most API endpoints to help integrators with providing correct input for the device
- Area of interest on Spot tablet
- Alert orbit on dBSPL at source
- Distance estimation for Spot
Bug Fixes:
o Fixed Zeroconf no longer showing IP of the services or device
o Fixed anomaly detector not being able to be created in some situations
o Fixed events showing twice in the event tab
o Fixed the total available storage given on the file management tab showing incorrect results on non + devices
o Fixed status led not showing the status of the services on device properly
o Fixed status led disable button in the front end not disabling the status led
o Fixed anomaly detector events not showing up in the events tab
o Fixed setting as a NTP host, not always working without reboots
o Fixed some missing options in the Swagger documentation
o General stability/edge case fixes to the front and back endxxx
o Fixed events showing twice in the event tab
o Fixed status led on the device not showing the status of the services on device properly
o Fixed status led disable button in the front end not disabling the status led
o Fixed the total available storage given on the file management tab showing incorrect results
o Fixed some missing options and outdated names in the Swagger documentation
o Fixed Zeroconf no longer showing IP of the services or device
o Fixed translation issue not revealing all available field in languages different from English
o Users not being able to create new area of interests with the latest versions of Google Chrome
o In certain scenarios, devices used to write logs to locations which were not being cleaned up by the software
o General stability/edge case fixes to the front and back end
o reaming page taking very long to load while SV600 is mounted on Spot
o Generated AS2 files not being able to be used in the Fluke Reporting tool
Version 2.7.0 - Official Release
Features:
(PDQ only with new License file accessible)
• Added PDQ capabilities as a measurement and an action.
o PDQ(Partial discharge quantification) can be used to determine what
kind of partial discharge is being measured and the intensity of it.
o A PDQ measurement includes a PRPD(Phase Resolved Partial Discharge)
plot expressed in Milli Pascal.
o A classification on the type of PD measured
• Translations have been added to the dashboard.
• Event/action configuration has been moved to the streaming page.
o You can now setup your whole event and action workflow from the
streaming page.
o Set up your events and actions while still seeing your acoustic stream
and spectrum/spectrogram.
• Added alarming functionality to the streaming page.
o Added a noise to the streaming page when an event triggers.
▪ Can be turned off/on manually.
o Added a color flickering to the streaming page when an event triggers.
▪ Can be turned off/on manually.
o Added manual deactivation which shows all unhandled events that have
been triggered while on the streaming page.
Spot 3.3 integration
o Able to visualize all actions done through the SV600-spot in BD scout
▪ Able to see trending information from measurements done in
scout
▪ Able to trigger events through scout
▪ Can now easily add extra metadata and information to existing
actions in scout
▪ Change measurement settings through scout
o A higher quality acoustic stream on the tablet
o Being able to adjust frequency selection through the tablet
o Ability to point spot through arrows on the acoustic stream displayed
on the tablet
o Able to create image, video and LeakQ measurement through the
acoustic stream
Bug Fixes:
• Fixed a user not being able to open the streaming page in some cases.
• Fixed an issue where sometimes file downloads would not work properly
Version 2.6.0 - Official Release:
- Added ability to have a livestream with beamformed overlay on the Spot tablet.
- Can be used by changing the spot camera view in the tablet
- Updated UI/UX for creating and adding events and actions.
- The whole workflow from measurement to action can now be set up through the streaming page
- Increased number of actions that can be created from 5 to 10.
- Increased the maximum amount of actions allowed in the system to 10
- Added new actions, including DataMeasurement (WAV), ImageSoundsurface (JPG,), ImageCapture (JPG), VideoSoundsurface (MKV), and
- LeakQSoundsurface (AS2).
- This allows for all measurements that create files, to be triggered as an action in the action event system.
- Area of interest feature now triggers only when the peak is inside the selected area.
- This greatly reduces the amount of false positives you get within you Area of interest from other loud sources.
- The disadvantage of this is that only the loudest source in frame can currently trigger an Area of interest event
Version 2.5.0 Engineering Release:
- Implemented GPS sensor through the api.
- More information in the API documentation
- Not implemented in the GUI
- Implemented gyroscope sensor through the api.
- More information in the API documentation
- Not implemented in the GUI
Version 2.4.0 – Engineering Release:
- Added event localization to the streaming page.
- A red circle will be drawn on the location of an event.
- This will only work on measurements that have localization information like soundmaps or classifications.
- Implementing area of interest (AOI)
- Setup through the streaming page.
- This allows the user to only let events trigger when the threshold is exceeded within the area of interest.
- Added WAGO watchdog timer.
- This allows a WAGO system to validate that the system is still online and functioning correctly
Version 2.3.0 - Official Release:
- Added the ability to capture an image with soundmap overlay and spectrogram.
- This means that you can visualize most audio information in a single image easily
- Able to record video and audio from the device.
- Added video and audio recordings based on measurements, meaning they can also be triggered using actions.
- The maximum recording time per video is 30 minutes.
- Able to start/stop video and audio measurements.
- This allows the user to start a measurement without a known duration, stopping it whenever they want.
- This functionality can be used through the streaming page by using the record and stop buttons.
- Improved image capture measurement.
- Improved the quality of the image capture itself
- Improved blob drawing quality
Version 2.2.0 - Official Release:
- LeakQ measurements will only show soundmap overlay when there is an actual leak.
- This makes it visually more clear if there is a leak in the image or not
- Added anomaly detector as measurement.
- This enables users to start using a very basic anomaly detector
Version 2.1.0 - Official Release:
- Added fieldbus coupler WAGO Input support.
- Added .wav measurement option.
- This allows users to make audio recordings through the device, to be able to hear at a distance.
- Added actions.
- Actions can be linked to events, to let the device perform an action once an event has been triggered
Version 2.0.0 – Official Release:
- Added AS2 measurements for images, videos, and LeakQ.
- Added events for soundmap and Leq measurements.
- These events can be used to trigger external software based on sound events
- Added Fieldbus Coupler (WAGO) support.
- Added the ability for users to send to the field bus coupler WAGO (Modbus-based commands) output when an event triggers.
- LEQ (combined) measurements are now stored for a month even after a reboot.
- This enables users to look back at past data to analyze the sound pressure over time?
- Device manager split off from main backend application for improved stability.
- This allows users to restore the device even if the main service is down