**********Warning. Devices with firmware revision 1.0.1 or older must be connected to the pc via a router to successfully update the firmware. If this step is not done, the device could be permanently rendered inoperative.*************
To receive a link to download the latest firmware Click Here to create a support ticket
Step 1 - download firmware files. The file size are large approx. 500MB (please note if you need Standard Firmware or Firmware for Spot Payload)
You need to update each Firmware version upwards
Basic Firmware 1.0.1 (is lowest revision in field)
2.0.1
2.1.0
2.2.0 (was only beta)
2.3.0
2.3.1
2.7.0
Step 2 - Connect SV600 and take care that you use DHCP/ Auto IP for Firmware Update lower than 2.0.1
Step 3 - Go to Firmware Update in SV600 Menu
Step 4 - Choose your firmware file and start update, accept also the browser pop up window
Standardfirmware
BD (SV600 Firmware for Spot)
Step 5 - Reconnect after reboot (When Firmware update was successful the SV600 will reboot automatically.)